Best Garage Air Compressor Reviews [2020 Guide]

So you are looking for Best Garage Air Compressor Reviews. We have provided reviews of 4 compressors which are great for your garage but if you don’t find the option you were looking for then do check out more compressors at our main page on portable air compressors.


There are a lot of different types of compressors which can be used in your garage.

But considering the type of jobs that you will be undertaking in your garage my pick is Makita MAC 2400 2.5 HP Compressor.

It has cast iron components which gives it a long operational life and it scores great scores across all customer reviews on various websites. It is powerful, extremely reliable & makes low noise as compared to others in this category and you can get it at a great price from Amazon.

I have listed CFM requirements of some popular DIY tools which will be useful for you to decide type of compressor you would need.

  • Brad Nailer – 0.3 CFM
  • Framing Nailer – 2.2 CFM
  • Drill – 3 to 6 CFM
  • Impact Wrench – 2.5 to 5 CFM
  • Ratchet – 2.5 to 5 CFM
  • Angle Grinder – 5 to 8 CFM
  • Orbital Sander – 6 to 9 CFM

The Makita MAC2400 Big Bore 2.5 HP  (No. 1 Recommendation)

Makita MAC2400 ReviewThis compressor is one of the great products from Makita which has received awesome reviews and ratings in this category . Just from the pictures, one can easily note a masterpiece of design and color.

What can be missed from the killer looks in the pictures is the amazing capabilities of Makita MAC2400 Big Bore 2.5 HP compressor. This tool can deliver power of up to 2.5 HP and up to 90 PSI air pressure.

With such abilities, one can manage to deliver tasks like brad nailing, painting and aiding in tire filling of bikes. The pump which is oil lubricated has a large air filter for more air intake which minimizes the recovery time in order to boost performance.

  • Weight: It is a medium weight compressor of about 77 pounds.
  • Source of Power: Makita MAC2400 Big Bore 2.5 HP compressor is electricity powered with 120V and 15 amp.
  • Lubrication: The compressor’s fan is lubricated by oil can be monitored by a glass covering notable on the outer covering.
  • Composition: A double stack shaped cylinder tank made of steel form the basis of the Makita MAC2400 Big Bore 2.5 HP compressor. An outer covering of metal cage and plastic shield the inner delicate parts.
  • Power output: It releases about 2.5 HP and moderately high air pressure ranges between 40 PSI to 90 PSI.

Going by the buyer’s reviews in amazon, a good majority of buyers were greatly satisfied by the product. It can easily run Impact Wrenches (3/8 Inch & 1/2 Inch), Brad Guns, Finish Nailer, Blow Guns. It is rated at 4.2 CFM so all the tools which do not require continuous air flow can run without any issues. It is truly a masterpiece to be utilized in your garage.

>> Click Here To See Today’s Price <<

Porter Cable PCFP02003 (#2 Recommendation)

Porter Cable PCFP02003 SmallIf you are looking for a compressor which is more portable than Makita MAC2400 then I suggest this option. The amount of power it can deliver is lower than the above choice (2 SCFM vs 4.2 SCFM). But then this power is good enough for small nail jobs, framing jobs, roofing jobs, general inflation tasks.

The compressor is 26 lbs which compared to Makita MAC2400 (77 lbs) is a big advantage in case you are looking to carry this unit along with you.

Another factor is cost as PCFP02003 is around one third the price of MAC2400. So again if cost is a constraint then this option will suit you better.

But then obviously there will be certain compromises in the build quality, power output, noise level, tank refill rate and so on if you compare it to Makita MAC2400.

>> Click Here to See Today’s Price <<

Viair 00088 88P (#3 Recommendation)

Viair 88P Portable CompressorNow in case the only requirement of compressor in your garage is to inflate tires then this Viair Compressor is the latest model to hit the markets and has got consistently high scores across all retailers.

As compared to its other models like 70P, 85P this model has got almost 45% duty time which means you can run the compressor for 4.5 minutes after which 5.5 minutes are needed to cool off. This is highest cycle time, 70P has 1.5 min run time & 8.5 min cool time, 85P has 4 min run time & 6 min cool time.

Also 88P delivers highest CFM (1.98 SCFM) as compared to 1.27 SCFM (70P) & 1.83 SCFM (85P). Also you can use it to fill tires upto 33 inch.

>> Click Here To See Today’s Price <<

In case you want to check out some more options in tire compressors category then see this page.

Makita MAC700 Big Bore 2.0 HP Compressor (#4 Recommendation)

Makita MAC700 Review

Makita MAC700 is one of the good air compressors released by the Makita Company. It offers a great share of aid in the popular tasks like cleaning, nailing and even painting.

Makita Big Bore 2.0 is designed to produce high outputs from low current inputs and reduce the initial levels of noise from its predecessors. It has a steel cylinder that helps to store the compressed air as well as boosts its durability by preventing it from physical damages.

The Makita MAC700 Big Bore is also capable of tolerating stress from its environment enabling it to perform perfectly even in adverse conditions.

  • Maximum air pressure: medium ranges between 40 psi and 130 psi.
  • Electricity usage: 120V and 12.4 Amperes.
  • Weight: 52 pounds.
  • Horsepower: 2hp.
  • Cylinder composition: steel.

The Makita MAC700 Big Bore 2.0 HP compressor is one of the most sold air compressor in most sites. In Amazon, it acquired a good rating from customers. It is an incredible tool that cares for both cost, quality and durability. This makes it a favourite option for many people.

>> Click Here To See Today’s Price <<

Click Here to Leave a Comment Below 0 comments